Skip to content

Material testing & NDT in Gujranwala.

Destructive testing in our lab, non-destructive testing and pressure vessel inspection on your site. Reliable results that help contractors, engineers and plant owners decide with confidence.

Inspector performing fluorescent magnetic particle testing on a steel weld

A | Destructive Testing (DT)

Strength, proven to the limit.

Destructive testing applies controlled force or stress to material samples to determine their mechanical properties, strength and performance limits. It is the most direct way to confirm that what arrived on site matches the specification.

Concrete cube being crushed in a compression testing machine
DT.01

Concrete Compressive Strength

Cube and cylinder crushing at 7 and 28 days to confirm the specified grade.

DT.02

Steel Tensile Strength

Yield, ultimate strength and elongation of rebar and structural steel.

DT.03

Steel Bend and Re-Bend

Ductility checks that catch brittle bars before they crack on site.

DT.04

Cement Testing

Setting time, consistency, fineness and strength of cement samples.

DT.05

Aggregate Testing

Grading, impact, crushing value, flakiness and cleanliness of coarse and fine aggregate.

DT.06

Soil Compaction Testing

Proctor and field density tests for fills, sub-grades and foundations.

DT.07

Sieve Analysis

Particle size distribution for sand, aggregate and soil.

DT.08

Water Absorption Testing

Absorption of bricks, blocks, tiles and aggregate.

DT.09

Other Material Tests

Ask us about any other construction material test your project requires.

YOUR SAMPLESSend samples to our labBook a test

B | Non-Destructive Testing (NDT)

Find the flaw. Keep the part.

Non-destructive testing examines materials, components and structures without affecting their function or integrity, helping identify defects and assess structural condition while the asset stays in service.

Ultrasonic probe scanning a pipe weld with an A-scan displayUT

Ultrasonic Inspection

High frequency sound finds internal flaws in welds, plates and forgings, and measures remaining wall thickness of tanks and pipes.

Best for
Butt welds, thick sections, thickness gauging

Book UT
Fluorescent magnetic particles revealing a crack under UV lightMPT

Magnetic Particle Testing

A magnetic field and fine iron particles reveal surface and near surface cracks in carbon steel, even hairline indications.

Best for
Fillet welds, lugs, hooks, shafts, steel connections

Book MPT
Red dye penetrant indication on a stainless steel weldDPT

Dye Penetrant Testing

Coloured penetrant and developer show open surface defects as sharp red lines on any non-porous material.

Best for
Stainless steel, aluminium, machined and non-magnetic parts

Book DPT

Concrete and structures

In-situ NDT for buildings and infrastructure

Assess existing structures, check suspect concrete and locate reinforcement before coring or drilling.

  • Rebound Hammer Test
  • Ultrasonic Pulse Velocity (UPV)
  • Concrete Cover Meter Test
  • Half-Cell Potential Test
  • Concrete Core Testing Coordination
  • Structural Condition Assessment
  • Reinforcement Detection
  • Crack and Defect Inspection
  • Weld Inspection
  • Other Applicable NDT Techniques
Two inspectors examining a horizontal pressure vessel in a fabrication yard

C | Pressure Vessel Inspection

Stored energy, kept under control.

Boilers, air receivers, storage tanks and process vessels hold enormous energy. Our inspections combine visual examination, thickness surveys and weld NDT to confirm they are safe to operate.

  • 01Visual examination of shell, heads, nozzles and supports
  • 02Ultrasonic thickness survey against design minimums
  • 03Weld seam inspection by MPT, DPT or UT
  • 04Hydrostatic test witnessing
  • 05Safety valve, gauge and fittings check
  • 06Fit for service report with photos and recommendations
Schedule an inspection

Who relies on our results

Decisions made on evidence.

01

Contractors

02

Consulting engineers

03

Developers

04

Project owners

05

Industrial plants

06

Fabrication workshops

FAQ

Common questions.

Both. Concrete cubes, steel, cement, aggregate and soil samples are tested in our lab. NDT methods such as ultrasonic, magnetic particle, dye penetrant, rebound hammer and UPV, and pressure vessel inspections are carried out at your site or plant.

As a general guide, bring three samples per bar diameter, each about one metre long. We will confirm the exact requirement for your specification.

Magnetic particle testing suits surface cracks in carbon steel welds, dye penetrant suits stainless steel and non-magnetic parts, and ultrasonic testing checks the full thickness of a weld for internal defects. Many inspections combine methods.

We assess the concrete in place with rebound hammer and UPV, and coordinate core testing if needed, so your engineer can make an informed decision instead of guessing.

Yes. Our pressure vessel inspections cover boilers, air receivers, storage tanks and process vessels, with thickness surveys, weld inspection and a clear fit for service report.

Request a test

Tell us what needs testing.

Send the details and we will confirm scope, sample requirements and timing. Your request opens in WhatsApp, ready to send to our lab team.

Where